2. Press the B-SKIP or F-SKIP Buttons to select the song to be programmed.
For example track 5 is selected.
3. Press the PROGRAM Button again to store the selection. The Program No. will advance to “
P02
”
and then change to “
00
” and blink to prompt for another input.
4. Press the B-SKIP or F-SKIP Buttons to select the next song to be programmed.
5. Press the PROGRAM Button to store the second selection. You may repeat steps #2 - #4 to
program as many as 20 tracks.
6. Press the CD PLAY/PAUSE Button to start playback in the
programmed sequence.
• After all the programmed tracks have been played, the player stops but the programmed tracks
remain in the memory.
• Press the PROGRAM Button followed by the PLAY/PAUSE Button to begin programmed
playback again.
7. To cancel programmed play, in Stop mode press the STOP Button once or open the CD DOOR.
8. To turn the System off, press the POWER / STANDBY Button. The LCD backlight will go off.
DOCKING YOUR iPod
1. Insert the universal adaptor for the type of iPod you will dock.
2. To remove the adaptor to exchange for the others, press at the
back of the adaptor and pull it upward.
3. Press the POWER / STANDBY Button once to turn on the System.
The LCD backlight will light.
4. Press the FUNCTION Button to select iPod mode.
5. Your iPod can now be inserted onto the iPod connector by aligning the connector on the bottom
of the iPod onto the connector in the docking bay.
Note
: Please be careful when seating the iPod into the docking to avoid damaging the 30-pin
connector on the iPod or in the Docking System.
6. The iPod will start playing automatically and also start charging.
Note
: The iPod will only be charged when the System is powered by AC.
7. Select the previous or next music tracks by pressing the B-SKIP or F-SKIP Buttons
repeatedly, and press the PLAY/PAUSE Button to play or pause.
Note
: The System’s LCD cannot show any music information (e.g. song name) of your iPod.
Please view the music information through your iPod display.
8. Adjust the sound level using the VOLUME CONTROL.
Note
: The volume level cannot be adjusted using the volume control on your iPod after docking.
9. To remove the iPod from the unit, press and hold the PLAY/PAUSE Button on the System for
a few seconds or simply press the STOP Button once to switch off the device and then gently
remove it from the dock connector.
10. To turn the Docking System off, press the POWER / STANDBY Button.
The LCD backlight will go off.
10
CD814 IPOD JENSEN IM 120V GB CUS11 11
2010/1/12 02:01:52
