9
iPod/iPhone DOCKING
If the docking port will not be used for an extended period of time, it is recommended to cover the
docking port by using the “Dock Cover” insert (included).
1. Use the iPod adaptor included in your iPod and insert it into the docking area. No adaptor required if
you use iPhone. Your iPod/iPhone can now be inserted into the docking port by placing the connector
on the bottom of the iPod/iPhone onto the connector in the docking bay.
Note:
- Please be careful when seating the
iPod/iPhone
into the docking to avoid damaging the 30-pin
connector on the
iPod/iPhone
or in the docking system.
2. Press the
POWER
button to turn on the unit.
3. Press
FUNCTION
button to select
iPod/iPhone
mode. The
iPod/iPhone
will start playing automatically
and start charging immediately.
4. Press the
PRESET/
button to pause or resume
iPod/iPhone
playback.
5. Adjust the sound level by turning the
VOLUME
wheel.
Note : The volume level cannot be adjusted using the volume control on
your
iPod/iPhone
after being docked.
6. The
iPod/iPhone
charges even during playback.
Note : The iPod/iPhone will charge in all modes.
7. To remove the iPod/iPhone from the unit, press and hold the button for three seconds to switch
off the device and then gently remove it from the docking connector.
iPod/iPhone
playback control:
- Press the button to pause or resume the iPod/iPhone playback;
- Press the iPod/iPhone Skip/Search Forward or Backward button to skip to the next or previous song;
- Press and hold the iPod/iPhone Skip/Search Forward or Backward button for fast-forwarding or
fast-rewinding during playback.
iPod/iPhone control function keys (using remote control):
- To repeat playback song / file, press
iPod REP
button.
- To random playback song / file, press
iPod RAN
button.
VIDEO OUT FROM THE iPod/iPhone
1. You can connect this unit to a television or other video display that has a composite video input.
2. Securely dock your iPhone or iPod with video.
3. Connect one end of an RCA cable (not included) to rear RCA video jack on the unit.
4. Connect the other end of the RCA cable to VIDEO IN of television or video display.
5. Press the
FUNCTION
button to select iPod/iPhone mode.
6. Select a movie from your iPod/iPhone menu.
7. iPod: On the main menu choose video then select video setting.
8. iPod: Make sure the TV Out section is set to "ON".
9. iPod: Switch back to the movie library and play the movie of your choice.
Note: Video out will automatic when using an iPod touch or iPhone.
EQ SETTING (REMOTE CONTROL ONLY)
This unit provides 4 preset EQ settings for your selection.
In either RADIO, iPod/iPhone or AUX modes:
To select preset EQ: ROCK, CLASSIC, POP or JAZZ ; press
EQ
button from the remote control.
The corresponding indicator shows on
.
You can select the desired effect by pressing the "EQ" button on remote control repeatedly at
following sequence:
display
10
