![background image](http://html1.mh-extra.com/html/jensen/jep-750/jep-750_user-manual_3813471007.webp)
A) FOUR WAYS TO POWER THE UNIT
1) “DYNAMO” POWER OPERATION
1
.
A
3.7V DC rechargeable lithium battery is included with JEP-750. When
first time using the unit, open the battery compartment and insert the
rechargeable battery according to the polarity shows inside the compartment.
2
.
C
lose the Battery Door.
3
.
L
ift the Crank Handle outward until it is fully extended. Rotate the
Crank clockwise as shown below. The CHARGING Indicator will light.
4
.
C
ontinue turning the Crank to generate electricity to charge the battery.
More power is generated the longer you turn the crank handle, and the
Radio listening time will be extended (Radio reception only).
Note:
It may require up to 5 - 6 minutes of cranking if the battery is completely
drained and the LCD clock display and LED light do not work. You may need to
press the reset button if lithium battery is charged up by cranking but radio or
LED light does not work.
5
.
P
ress the Power On/Standby button to turn on the unit for operation.
Do not burn or bury batteries. Do not puncture or crush. Do not
disassemble. Recycle Lithium batteries. Do not dispose of in the
trash.
If the electrolyte in the cells should get on your skin, thoroughly wash with
soap and water. If in the eyes, rinse thoroughly with cool water.
Immediately seek medical attention.
Use only chargers rated for Lithium cells. Be sure the charger's voltage and
current settings are correct for the battery pack being charged.
Lithium Battery Safety Instructions
E6
2
.
I
f low battery icon appears on the display, fully recharge the internal
rechargeable battery or use fresh “AAA” batteries.