Jensen JCR-160, Руководство пользователя

Страница: 10 / 14

E-9
Wake to Radio (only for FM) - Turning the “wake to” Radio ON:
The Radio will automatically turn on when the alarm time is reached. The
corresponding RADIO 1 or RADIO 2 indicator will flash.
The unit will start playing the last FM radio station you listened to when the wake
time is reached, so make sure the station is set to the one you
want to wake up to .
The volume level will start out low and gradually increase to maximum volume.
Press the SNOOZE BUTTON (#5) to temporarily turn off the radio, or
press the
STANDBY / MODE BUTTON (#8) to turn the radio off.
If no buttons are pressed when the radio is playing, it will continue playing for 60
minutes and then turn off automatically.
Review the Alarm time setting:
In standby mode, tap the VOL - / ALARM 1 BUTTON / VOL + / ALARM 2 BUTTON (#2
/ #3) once. The corresponding alarm indicator and alarm time will be flashing on the
display. The unit will automatically return to standby mode if no buttons are pressed
within 5 seconds.
Turning the daily alarms OFF:
In Standby mode, repeatedly tap the VOL - / ALARM 1 BUTTON (#2) to step
through the “wake to” options shown on the left side of the display.
Alarm 1 -> Radio 1 - > OFF (all indicators off and returns to the current time)
The ALARM 1 time will flash on the display as you step through the options.
All ALARM 1 options are disabled when the indicators are off and the current time
is showing on the display.
Turning off ALARM 2 will follow the same steps as ALARM 1 above, but you will be
using the VOL + / ALARM 2 BUTTON (#3) and the ALARM 2 indicators will be on
the right side of the display.
Notes:
•
For setting a one-day alarm, set the desired alarm time the day before following the
“
Setting the alarms
” section above.
•
The alarm will sound the next day at the set alarm time.
•
After turning off the alarm, follow the “ Turning the daily alarms OFF ” section
above to prevent the alarm from sounding again the next day.
SNOOZE FUNCTION
When the alarm sounds, tap the SNOOZE BUTTON (#5) to temporarily turn off the
alarm and activate the snooze function. The alarm will stop and turn on again 9
minutes later. This can be repeated when the alarm sounds again.
Notes:
• The corresponding AL1 or AL2 alarm indicator will flash during the snooze period.
•
To cancel the snooze period and the alarm, press the STANDBY
/ MODE
BUTTON (#8).