E-16
BLUETOOTH OPERATION
In Off (standby) mode, press the POWER/ STANDBY BUTTON on top of the main unit or on
the remote control to turn the unit ON and follow the directions below to connect via Bluetooth.
PAIRING (Linking) a BLUETOOTH ENABLED cell phone OR OTHER BLUETOOTH
ENABLED DEVICE to the JBS-300
If the JBS-300 has never been paired with a Bluetooth device before, you need to follow the
pairing instructions below to link the JBS-300 with your Bluetooth device.
1. In Off (standby) mode, press the POWER/ STANDBY BUTTON on top of the main unit or
on the remote control to turn the unit ON.
2. Tap
the
FUNCTION Button
on main unit repeatedly or
Button
on the remote control to
select Bluetooth mode, “No CoNN” message running and Bluetooth icon appear in LCD
display. JBS-300 is in search mode
3. If the JBS-300 has never been paired with a Bluetooth device before or cannot find the last
paired device, the running message “No CoNN” on LCD will indicate the JBS-300 is in search
mode. You need to follow the pairing instructions below to link the JBS-300 with your
Bluetooth device.
Turn on the Bluetooth function of your Bluetooth device and enable the search or scan
function to find the JBS-300.
Select "JBS-300" from the device list when it appears on your device screen. If required,
enter the pass code “0000” to pair (link) the JBS-300 with your device.
4. After successfully pairing (linking), display will change to show “CoNN” steadily, the Bluetooth
icon also will show in display. You can begin playing music from your Bluetooth device
wirelessly to the speaker.
5. After selecting your favorite song, press
PLAY/PAUSE
Button
on the unit or remote
control to play or pause the song.
6. Press the volume control on main unit or
remote control to adjust to the desired volume level.
7. Press or
Button on main unit or remote control to skip to previous or next song.
8. If you want to pair the JBS-300 with another Bluetooth enabled device, press and hold the
Button
for 2 seconds or turn off the Bluetooth function of device currently paired with JBS-300
then repeat step 3 above.
Notes:
1.) Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth enabled
devices for Bluetooth operation since it may vary from model to model.
2.) If your Bluetooth enabled device does not support A2DP profile, it will not play the music
through the speaker, even if paired (linked).
3.) If you are pairing (linking) your computer to the unit using Bluetooth, you may need to set the
speaker as your computer’s default sound device.
AUXILIARY INPUT OPERATION
This unit features an auxiliary audio signal input jack for connecting external audio devices like
MP3 players, Digital Audio Device and listen to them through the speakers of this unit.
1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the cable.
2. Plug one end into the
AUDIO IN JACK
on main unit and the other end of the cable into the
Line-out Jack or Headphone Jack of your external audio device.
3. Turn on the unit and external audio device.
4. Tap
the
FUNCTION Button
on main repeatedly or
AUX IN Button
on the
remote control to
select AUX mode, “AUDIO IN” icon turns on, display shows the current time.
5. The volume level can now be controlled through the main unit. Operate all other functions on
the auxiliary device as usual.
Note:
If you connect this unit to the Line-Out Jack of your external device then you only need to
adjust the volume control of this unit. If you connect the Headphone Jack of your external
device then you may need to adjust both the volume controls of your external device and this
unit to obtain the desirable volume setting.
Содержание JBS-300
Страница 8: ...E 7 LOCATION OF CONTROLS MAIN UNIT ...
