Jensen JBS-230, Руководство пользователя

Страница: 12 / 20

E-11
CHECKING THE CLOCK (REMOTE CONTROL ONLY)
The unit will show current time in standby mode. To check the current time in Power ON mode,
press and hold the
TIME SET Button
on remote control, the current time will show for 5 seconds
and then return to the previous screen.
ALARM OPERATION (REMOTE CONTROL ONLY)
SETTING THE ALARM CLOCK
This function allows the system to turn on automatically and wake you using a beeping alarm, the
CD ,USB,TUNER or the beep.
1. In standby mode, press and hold the
ALARM Button
on remote control, display will show “oN”
for 3 seconds and then alarm time 12:00 will appear in display. Hour digits of alarm clock start
flashing.
2. Press the /
Button
to set the hour and then press the
ALARM Button
again to confirm, Minute digits will be flashing.
Note:
Make sure the hour is set so that the
PM
indicator is displayed correctly.
3. Press the /
Button
to set the minute and then press the
ALARM Button
again to confirm, display will show “oFF” for 3 seconds and then alarm off time 1:00 will appear
in display. Hour digits of alarm off time start flashing.
4. Press the /
Button
to set the hour and then press the
ALARM Button
again to confirm, Minute digits will be flashing.
5. Press the /
Button
to set the minute and then press the
ALARM Button
again to
confirm, alarm wake up source will appear in display.
6. Press the /
Button
to select wake to CD,USB, Radio or Beep and then press the
ALARM Button
again to confirm, alarm volume level will be flashing.
Note:
Alarm volume level setting is not available in beeping alarm setting.
7. Press the /
Button
to preset the wake up alarm volume level and then press the
ALARM Button
to finish alarm setup.
NOTE:
1.)
If “Wake to CD” is selected but a CD is not inserted, the alarm will default to the Beeping Alarm
automatically when the alarm wake time is reached.
2.)
For ‘Wake to Radio”, the system will default to the last radio station listened to before switching
off.
ACTIVE/DE-ACTIVE ALARM FUNCTION
1. To active ALARM, tap the “ ALARM ” Button once, the alarm icon “
”
will shown on LCD
display.
2. To cancel ALARM function by tap again the “ ALARM ” Button until the alarm icon “
”
goes off.
Wake to Radio, CD or Beeping Alarm

When the alarm time is reached, the CD, radio or beeping alarm will sound for the time you
set then shut off and reset itself for the following day.

To stop the alarm immediately after it sounds, tap the STANDBY-ON B utton on remote
control or on main unit once. It resets itself for the following day.

To cancel the following day alarm, tap the ALARM Button once, ALARM icon“
”
goes off.