9
HD5112
Menu Operation
Press and hold
the rotary encoder (4) to access the system menu.
Repeatedly press the rotary encoder button to access menu options in the
following order:
•
BEEP ON/OFF: The beep tone feature allows the selection of an
audible beep tone to be heard each time a button is pressed on the face
of the radio. “BEEP ON” is the default display. Rotate the rotary encoder
to select the “BEEP OFF” option.
•
P--VOL: Turn the rotary encoder to select the default volume the radio
will assume when first turned on.
•
PCLK ON/OFF: When “ON”, the clock and backlight will remain on
when the unit is turned off.
•
PRI CLK/SRC: Select “CLK” to have the clock appear on the display
during playback. Select “SRC” to have the current source appear during
playback. Press the
DISP
button (7) to temporarily view the alternate
display (clock or source) temporarily.
•
HOURS 12/24: This option allows selection of a 12 hour or 24 hour
clock format. “HOURS 12” is the default setting. Turn the rotary encoder
to change to the 24 hour clock format.
•
S--MODE NORMAL/HD SEEK (adjustable only in RADIO mode):
Select “NORMAL” to allow the radio to search for both digital and
analog stations. Select “HD SEEK” to only search and broadcast digital
stations.
Equalizer
Press the
EQ
button (20) to choose one of the following pre-defined bass
and treble curves: FLAT > CLASSICS > POP M > ROCK M > DSP OFF.
Loudness
Press and hold
the
BAND
button (3) toggle loudness on/off. When listening
to music at low volumes, this feature will boost the bass and treble ranges
to compensate for the characteristics of human hearing.
Auxiliary Input
To access an auxiliary device:
1.
Connect the portable audio player to the AUX IN jack on the front panel
(12).
2.
Press the
SRC
button (2) to select AUX mode.
3.
Press
SRC
again to cancel AUX mode and go to the next mode.
Setting the Clock
If not already showing, press the
DISP
button (7) to display the clock. With
the clock displayed, press and hold the
DISP
button and the time will flash
on the display. Press the
TUNE/CH >>
button (10) to adjust the hours or the
TUNE/CH <<
button (11) to adjust the minutes. When in “HOURS 12”
mode, “AM” or “PM” will appear on the display to indicate AM or PM. When
no adjustment is made for five seconds, the time will become set and
normal operation will resume.
Reset Button
The
RESET
button is located behind the front panel and should be
activated for the following reasons:
•
initial installation of the unit when all wiring is completed
•
function buttons do not operate
•
error symbol on the display
Use a ball point pen or thin metal object to press the
RESET
button. This
may be necessary should the unit display an error code.
