![background image](http://html1.mh-extra.com/html/jensen/estate-s/estate-s_operation-manual_3743989008.webp)
M
o
d
e
l: J
e
n
se
n
G
ril
l E
st
at
e S / J
e
n
se
n
G
ril
l E
st
at
e B
10
Jensen gas and charcoal barbecue
1
2
3
Mount (1), (2) and (3) on drawers
Slide (2) onto (3). Slide (1) over (2). Line up the holes in (1), (2)
and (3). Tighten the small setting screw (S 7). Mount handles
from the inside of the drawer with screws (S 10). Make sure the
small setting screws are pointing downwards.
Place the drawers in the BBQ. Lift up the front of the drawer
and insert the “roller, drawer” into the “drawer runners”. Lower
the front and close the drawer.
Adjust position of drawers
If the drawer font is hitting the “External panel, front” or there
is another need for adjustment. Loosen the screws holding the
drawer runners. Adjust them and tighten the screws again.
2
3
21
26
1
Mount (1), (2), (3) and (21) on the “grate”
Slide (2) onto (3). Slide (1) over (2). Line up the holes in (1), (2)
and (3). Tighten the small setting screw (S 7). Mount handle
with screws (S 10) from the inside with (21) between the grate
and handle. Make sure the small setting screws are pointing
downwards.
Mount (26)
(26) is fitted with clips in each corner. Place it anywhere on top
of the grate. Push it in place so the clips secure it.
28
32
33
Mount (28), (32) and (33) on the right-hand side of the BBQ
Place (28) inside the two brackets on the BBQ. Slide (32)
through (28) in the bracket. Take (33) and place over (28)
inside the bracket with the hole with the thread facing upwards.
Line up the holes in (28), (32) and (33). Put the screws (S 12)
through the holes. Make sure the screw is vertical before the
handle is fixed by tightening the screw up against the brackets.