![background image](http://html2.mh-extra.com/html/jensen/cd-26/cd-26_instruction-manual_3728865005.webp)
During PLAY mode
•
The track number and instant playing time are displayed.
During PAUSE mode
•
When the track playback is paused, the playing time flashes.
Battery Low Indicator
A flashing battery indicator flashes in the display when the batteries need to
be changed.
NORNAL PLAYBACK
The whole disc is played and the player will stop after the last track is finished.
Every time the
MODE
button is pressed, the corresponding mode appears
in the display window, in the following sequence:
REPEAT 1
In stop or playback mode press the MODE Button once.
REPEAT 1
When shown on the LCD display, the current track on the
disc will be repeated.
REPEAT ALL
In stop or playback mode press the MODE Button twice.
REPEAT ALL
When shown in the LCD display, all tracks on the disc will
be repeated.
To cancel the Repeat Function, press the
MODE
Button repeatedly until
“
REPEAT1
” or “
REPEAT ALL
” disappears.
INTRODUCTARY SCAN
To play the first 10 seconds of each track on the disc.
1. In STOP mode press the
MODE
button three times, “
INTRO”
is displayed.
2. Press button to start INTRO play from track number 01.
3. If INTRO mode is selected during play,
INTRO
will start flashing in the display.
•
Press button. INTRO stops flashing and INTRO play starts from track 01.
•
Press to start INTRO play from next track.
•
Press to start INTRO play from current track.
•
To cancel INTRO play, press again. Playback continues on current track.
RANDOM
Enables all the tracks on the disc to be played in a Random sequence.
1. In STOP mode press the
MODE
button four times, RANDOM Indicator,
“RANDOM”, will be displayed.
2. Press button. A track is selected at random and playback begins.
3. If RANDOM mode is selected during play, “RANDOM” will appear and flash in
the LCD Display.
VARIOUS PLAYBACK MODES
4. Press button once. “RANDOM” stops flashing and RANDOM
playback begins.
5. Press
the
MODE
Button again to return to normal play mode.
Programs can be set in either the STOP or normal play mode.
PROGRAMMED PLAY
1. Press the PROG button once, PROG No. 01 appears.
PROG
and Track No.
00
start flashing in the display.
2. Press or to select the desired track.
3. When the desired track is displayed, press the PROG button to register. The
PROG No. changes to
02.
Track No. returns to
00
and flashes together with
PROG
.
4. Repeat steps 2 and 3 to program more tracks.
Up to 20 tracks can be programmed into the memory.
5. Press to start the programmed play.
6. Normally all the programmed tracks will be played through once and then stop.
However, you may use the REPEAT function to repeatedly play a certain track
(Repeat 1) or all tracks in the program (Repeat All).
7. To erase the program, press the STOP Button twice.
EN-8
EN-9