Jensen 561301678, Руководство по эксплуатации

Страница: 70 / 110

Operating instructions HMCflex
11/23 © ehb errors and omissions excepted
3.1 Service overview diagram
For the factory-set code for the service menu, please enter 1884 with the arrow keys and confirm the
individual figures with the SET key. Next you go into the service menu field, as you can see from the
diagram below. Use the arrow keys to navigate within the main menu. You quit the sub-menu by con-
firming the pin number you entered via the SET key.
[2] Service
Settings Sub-menu
Options/ Input
Note
[1] Service adj. status SET active, inactive SET options
interval SET 50, 100, 150, 200, 250 SET options
@EngHour 50
service occured
SET service is occured SET
exit SET display returns to the main menu SET
[2] Saved Errors No 1 – no. 10
exit SET Display returns to the main menu SET
3.2 Security overview diagram
For the factory-set code for the security menu, please enter 1884 with the arrow keys and confirm the
individual figures with the SET key. Next you go into the security menu field, as you can see from the
diagram below. Use the arrow keys to navigate within the main menu. You can also change the pin
numbers using the arrow keys. When doing this, each figure must be confirmed by SET. You quit the
sub-menu by confirming the pin number you entered via the SET key.
***Security***
Pin no.:
***Service***
Pin no.:
Arrow key