8
POWER SOURCE
This Micro System is designed to operate on AC 240V ~ 50Hz line power. The Remote
Control unit operates from 1 “CR2025” Lithium battery (Included).
GETTING STARTED
ATTACHING THE SPEAKERS
NOTE: The right and left speakers are NOT interchangeable. The speaker with RED plug
fits only on the right side. The speaker with WHITE plug fits only on the left side.
1. Place the right speaker on the right side and the left speaker on the left side of the
main unit and unwind the speaker wires from behind the speaker boxes.
2. Insert the right speaker plug into Right Speaker Out Jack (16)
3. Insert the left speaker plug into Left Speaker Out Jack (17).
4. Wrap the remaining wire behind each speaker box.
NOTE:
Please be sure both speaker plugs are plugged into the jacks before the unit is
powered.
AC POWER CONNECTION
Connect the power cord to an AC 240V~ 50Hz power source.
NOTE: Please check and be sure your local Voltage is match to the voltage
requirements on the back plate of player. The mains plug is used as disconnect device,
the disconnect device shall remain readily operable.
Remarks:
In case of malfunction due to electrostatic discharge (ESD), reset the unit by unplugging
and reconnecting to the AC outlet again to resume to normal operation or by pressing the
Reset Switch (20) with a pointed object.
ACTIVATING THE REMOTE CONTROL TRANSMITTER
Remove the plastic insulator tag sticking out of the Battery Compartment of the Remote
Control by pulling on it. Once the tag is removed, the Remote Control will be ready for
use.
BATTERY CARE
i. If the unit is not to be used for an extended period of time, remove the battery. Old or
leaking batteries can cause damage to the Remote Control.
ii. Do not dispose of batteries in fire, batteries may explode or leak.
