11
4. Press the MODE/PGM/CLK ADJ Button once. The Preset Channel Number “01” with
the flashing Preset Indicator, “M”, will appear in the left bottom of the Display.
5. While the Preset Indicator “M” is blinking, press the
/MEM+ Button to select the
desired preset channel.
6. Press the MODE/PGM/CLK ADJ Button again to confirm.
7. Tune to another station and repeat steps 4 to 6 to store the station in another preset
channel.
TO RECEIVE PRESET STATIONS
1. Press the Standby/On
Button to turn on the unit.
2. Press the FUNCTION Button to operate the unit in the radio mode.
3. Press the /MEM+ button to select the desired preset channels.
4. Press the Standby/On
Button again to turn off the unit.
CD OPERATIONS
The following procedures can be accomplished by using the remote or controls on the unit.
The icon
indicates the task can only be done on the unit.
NOTE:
This player plays not only commercial CDs but self-complied CD-D/RW discs.
Do not attempt to play CD-ROM, CDI, VCD, DVD or computer CDs.
Notes on CD-R/RW Discs
•
Because of non-standardized format definition/production of CD-R/RW, playback
quality & performance are not guaranteed.
•
Manufacturer is not responsible for the playability of CD-R/RW due to recording
conditions such as PC performance, writing software, media ability, etc.
•
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a
malfunction.
PLAYING A CD
1. Press the Standby/On
Button to turn on the unit.
2. Press the FUNCTION Button to enter CD mode if required. “disc” will appear in the
Display if no disc is loaded.
