13
Installation
The temperature regulation should not be faster than 15 K/min.
Caution: Temperature
adjustment!
Before applying the diode current, the LBO temperature and the diode tempera-
ture must be adjusted according to the specifications of the -->
Device Card
.
Make sure that the constancy of LBO temperature and diode temperature com-
plies with your -->
Specifications
.
To achieve stable output parameters of the thin disk laser we recommend to
keep the LBO temperature stable within < 0.2K and the diode temperature
within < 0.5K.
•
Finally, disconnect the short-circuit bridge (
3
,
Fig. 2, p. 9
) between the con-
necting terminals and keep it for future use.
Warning: Laser radiation!
The Disk Laser has
no ON/OFF switch
.
Laser radiation is instantly emitted when diode current is supplied
.
Note for relocation and transport
•
Before disconnecting the device electrically, insert the short-circuit bridge (
3
).
•
For relocation or transport, please use the original packaging. Make sure to
close the folding bag after the device was inserted.
•
For storage and transport conditions, refer to your -->
Specifications.