10
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Ruies. These limits are designed to provide reasonable protection against harmful interference in
commerical installation.This equipment generates, uses and can radiate radio frequency energy and lf not instal-
led and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarentee that interference will not occur in a particular installation. lf this equipment does
cause harmful interferece to radio or television reception, detectable by turning the equipment in question off
and on, the user is encouraged to try to correct the intereference by one or more of the following measures:
Reorient or rolocate the receiving antenna; Increase the distance between the equipment and the receiver;
Connect the equipment to an outlet on a different circuit than that which the receiver is connected to; Or consult
the dealer or an experienced radio/TV technician for help.
NOTE
A shielded-type DC power cable incorporated with a ferrite core is required in order to meet the FCC
emission limits and also to prevent interference to the nearby radio and television reception. Use only
shielded 1/0 cable incorporated with a ferrite core to connect this equlpment to host computer and
TV set. Shielded A.C. power cable and shielded 1/0 cables are required in order to meet the FCC emi-
sion limits. lt is essential that only the supplied power cord and 1/0 cable(s) be used,
