Securing the glass
Step # 19
INSTALLATION INSTRUCTIONS
If required - repeat step # 18 with
the acrylic block for the right side of
the cabinet. Again, use the provided
screws to bolt the acrylic to the rear
cabinet.
Step # 20
Verify the proper AC voltage on your power supplies
Although your unit should ship from
your distributor with the proper line
voltage already selected, its always
best to verify that each selector on
the power supplies are set to the
proper voltage. Select 115 for all
domestic U.S. operations.
Step # 21
Install your card reader (if required)
If you plan to use a card reader, we
have labeled the COIN UP, 12 VOLT,
and COMM wires so they can be
easily identified and tapped into.
Note that if you plan to go
TICKETLESS - you MUST tap into the
wires on the TICKET DISPENSER side
of the TICKET PCB BOARD.
Jennison Entertainment Technologies
Rockin Rollin Service Manual V-1.8
Page 19
