Step # 5
Once the container is openend make sure all components are included,
you should see the Power Pong, spare parts box, two red side cup
holders, two blue side cup holders, and one white front control. Inspect
the game packaging for any damage during shipment. Please note that
you must notate any damage to the equipment on the Bill of Lading
during the delivery process. Any claims for damage must be made directly
with the shipping or freight company. Jennison Entertainment
Technologies and (or) the distributor the equipment was purchased
through, is NOT RESPONSIBLE for any damage received during shipping
and CANNOT help with the filing of the damage claim.
NOTICE
Step # 4
PACKAGING AND PALLET MAY BE DIFFERENT THAN
SEEN IN PHOTO
Check Box When This Step is Complete
Opening the Box
After removing the top of the container, using the same method as
before, remove all four sides making sure to pull boards away from
the game at all times.
NOTICE
PACKAGING AND PALLET MAY BE DIFFERENT THAN
SEEN IN PHOTO
Check Box When This Step is Complete
Inspecting the included components
INSTALLATION INSTRUCTIONS
Before lifting the game remove the wooded blocks holding the legs
to the pallet. With the help of at least one other lift the Power Pong
off the skid by placing your hands on the lower panel inside of the
legs to protect your hand in case of the game falling over (This game
weight 525 pounds the more help you have the better). Once the
game is on the ground rotate the legs counter clockwise to raise the
legs. From this point moving the game around should be easy with
the aid of the caster wheels already installed on the game.
Check Box When This Step is Complete
Step # 6
Removing Power Pong from the skid
Jennison Entertainment Technologies
Power Pong Service Manual
Page 14
