Jenn-Air RISE JUWFR242HM, Инструкция по использованию и уходу, а также руководство по установке

Страница: 14 / 36

14
CARE AND CLEANING
CLEANING
Clean the wine cellar once a month to avoid buildup of
odors. Wipe up spills immediately.
TO CLEAN YOUR WINE CELLAR:
1.
Unplug wine cellar or disconnect power.
2.
Remove all racks from inside the wine cellar.
3.
Hand wash, rinse, and dry removable parts and
interior surfaces thoroughly. Use a clean sponge or
soft cloth and a mild detergent in warm water.
To avoid damaging wooden tines and trim
pieces, wipe them off with a clean sponge or
soft cloth and warm water. Do not use detergent
or immerse the entire rack into water when
cleaning.
Do not use abrasive or harsh cleaners such as
window sprays, scouring cleansers, flammable
fluids, cleaning waxes, concentrated detergents,
bleaches or cleansers containing petroleum
products on plastic parts, interior and door liners
or gaskets. Do not use paper towels, scouring
pads, or other harsh cleaning tools. These can
scratch or damage materials.
To help remove odors, you can wash interior walls
with a mixture of warm water and baking soda
[2 tbs to 1 qt (26 g to 0.95 L) of water].
4.
Wash stainless steel and painted metal exteriors with
a clean sponge or soft cloth and a mild detergent in
warm water. Do not use abrasive or harsh cleaners,
or cleaners containing chlorine. These can scratch or
damage materials. Dry thoroughly with a soft cloth.
NOTE:
To keep your stainless steel wine cellar looking
like new and to remove minor scuffs or marks, it
is recommended that you use the manufacturer’s
approved Stainless Steel Cleaner and Polish. To order
the cleaner, refer “Accessories” section.
IMPORTANT:
This cleaner is for stainless steel parts only!
Do not allow the Stainless Steel Cleaner and
Polish to come into contact with any plastic parts
such as the trim pieces, dispenser covers or door
gaskets. If unintentional contact does occur, clean
plastic part with a sponge and mild detergent in
warm water. Dry thoroughly with a soft cloth.
5.
Replace the racks.
6.
Clean the condenser coils regularly. They are located
behind the base grille. Coils may need to be cleaned
as often as every other month. This may help save
energy.
Remove the base grille to access condenser for
cleaning. Refer “Removing Base Grille” section.
REMOVING BASE GRILLE
You must remove the base grille to access the condenser
coils for cleaning.
TO REMOVE THE BASE GRILLE:
1.
Open the wine cellar door.
2.
Using a Phillips screwdriver, remove the two screws.
3.
Remove the base grille.
TO REPLACE THE BASE GRILLE:
1.
Open the wine cellar door.
2.
Position the base grille so that both tabs align and
the base grille snaps into place. Replace two screws.
Tighten the screws.
VACATION CARE
If you choose to turn the wine cellar off before you leave,
follow these steps.
1.
Remove all wine bottles from the wine cellar.
2.
Unplug the wine cellar.
3.
Clean the wine cellar. Refer “Cleaning” section.
4.
Tape a rubber or wood block to the top of the door
to prop it open far enough for air to get in. This stops
odor and mold from building up.
MOVING CARE
When you are moving your wine cellar to a new home,
follow these steps to prepare it for the move.
1.
Remove all wine bottles from the wine cellar.
2.
Unplug the wine cellar.
3.
Clean, wipe, and dry it thoroughly.
4.
Take out all removable parts, wrap them well, and
tape them together so they don’t shift and rattle
during the move.
5.
Tape the doors shut and tape the power cord to the
wine cellar.
When you get to your new home, put everything back
and refer to the “Installation Instructions” received with
the wine cellar.
WARNING
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
A
A. Screws