WARNING
!
To avoid risk of electrical shock, personal injury or death;
disconnect power to unit before servicing.
Disassembly Procedures
©2004 Maytag Services
16022882 Rev. 0
23
Dual Valve
1. Remove griddle assembly from unit, see “Griddle Plate
Assembly” procedure steps 1 through 6.
2. Remove screws securing the back of the griddle
burner hanger.
3. Remove back panel assembly.
4. Disconnect gas lines from the dual valve.
5. Disconnect and label wire terminals from the dual
valve.
6. Remove screws securing dual valve to firebox.
NOTE:
Carefully move the griddle burner baffle out of the
way to gain access to screws.
7. Reverse procedure to reassemble.
Single Thermal Valve
1. Remove oven door, see “Oven Door” procedure.
2. Remove screws securing kick plate at each top
corner.
3. Remove all oven racks and oven rack supports, by
lifting upward and pulling the bottom inward towards
the center of the oven cavity, then downward to
disengage from lower support brackets.
4. Remove screws securing lower support bracket to
oven cavity.
5. Remove oven bottom, by lifting upward and pulling
forward to removing from oven cavity.
6. Remove screw securing burner, located at the rear of
the burner.
7. Disconnect gas line from the single valve.
8. Remove nuts securing single valve to mounting
bracket.
9. Reverse procedure to reassemble.