Jenn-Air JXU9130WP1 Скачать руководство пользователя страница 10

10

3.

Use UL listed wire connectors and connect black wires (B) 
together.

4.

Connect green (or bare) ground wire from home power supply 
to yellow-green ground wire (C) in terminal box using UL 
listed wire connectors.

5.

Install terminal box cover.

6.

Check that all light bulbs are secure in their sockets.

7.

Reconnect power.

Install Vent Covers (Optional)

If you are installing an optional full width duct cover, follow the 
instructions included with that product.

Complete Installation

1.

Install metal grease filters. See the “Range Hood Care” 
section.

2.

Check the operation of the range hood blower and light. See 
the “Range Hood Use” section.

NOTE:

 To get the most efficient use from your new range hood, 

read the “Range Hood Use” section.

RANGE HOOD USE

The range hood is designed to remove smoke, cooking vapors 
and odors from the cooktop area. For best results, start the hood 
before cooking and allow it to operate several minutes after the 
cooking is complete to clear all smoke and odors from the 
kitchen.
The hood controls are located on the right-hand underside of the 
range hood.

Range Hood Controls

Operating the lights

1.

Turn the light switch to the Night position to use the range 
hood lights as a night light.

2.

Turn the light switch to the High position to turn the range 
hood lights On.

3.

Turn the light switch to the Off position to turn the range hood 
lights Off.

Operating the blower

1.

Turn the blower switch to the first position to turn the range 
hood on Low.

2.

Turn the blower switch to the second position to turn the 
range hood on Medium.

3.

Turn the blower switch to the third position to turn the range 
hood on Medium - High.

4.

Turn the blower switch to the High position to turn the range 
hood on High.

5.

Turn the blower switch to the Off position to turn the range 
hood blower Off.

WARNING

Electrical Shock Hazard

Electrically ground blower.

Connect ground wire to green and yellow ground wire 
in terminal box.

Failure to do so can result in death or electrical shock.

A. Halogen light control
B. Fan control

A

B

Содержание JXU9130WP1















Отзывы: