Jenn-Air JS42NXFXDE, Руководство по установке

Страница: 18 / 72

18
Top View
Move Refrigerator to Final Location
IMPORTANT:
■
A flush installation is NOT possible with a 24" (60.9 cm) deep
opening.
■
To avoid floor damage, make sure levelers are raised (not
touching floor) and refrigerator is on rollers before moving.
■
Use the installation block, attached to the door hinge, as a
reference to make sure the refrigerator is pushed back far
enough into the opening, so that when the panels are
installed they will be flush with the adjacent cabinets.
■
After the refrigerator is leveled and aligned, remove the
installation block from the door hinge and use it to check
the spacing between the panels and adjacent cabinets.
NOTE: The installation block is designed to provide accurate
spacing for
³⁄₄
" (1.9 cm),
³⁄₈
" (9.53 mm) and
¹⁄₈
" (3.18 mm).
1. Place top of cardboard carton or plywood under refrigerator.
Remove dolly.
2. Move the refrigerator straight back and evenly into the opening.
Be sure that the water tubing is not kinked and the power
supply cord is on top of the refrigerator.
NOTE: If the power supply cord is behind the refrigerator, it
will not install properly.
3. Make sure the installation block is flush with the adjacent
cabinets.
NOTE: To achieve a flush installation, it is critical to verify
a
³⁄₄
" (1.9 cm) depth from the front face of the adjacent
cabinetry to the refrigerator.
Level and Align Refrigerator
IMPORTANT: All four leveling legs must contact the floor to
support and stabilize the full weight of refrigerator. Rollers are
for moving the refrigerator, not for permanent support.
After moving the refrigerator to its final location:
1. Use a
⁵⁄₁₆
" socket driver to turn the leveling bolts clockwise
to extend the legs to the floor as shown. The rollers should
be off the floor.
2. Adjust the leveling legs to level and align the refrigerator from
left to right and front to back so that the refrigerator is level and
aligned with the cabinets.
A. Side trim
B. Adjacent cabinet C. Door
A
B
C
WARNING
Tip Over Hazard
Refrigerator is top heavy and tips easily when not
completely installed.
Keep doors taped closed until refrigerator is
completely installed.
Use two or more people to move and install
refrigerator.
Failure to do so can result in death or serious injury.
¹⁄₈
"
(3.18 mm)
³⁄₈
"
(9.53 mm)
³⁄₄
"
(1.9 cm)
A. Adjacent cabinet or wall
B. Installation block
C. Face of refrigerator
A. Rear leveling bolt
B. Front leveling bolt
B
C
A
³⁄₄
" (1.9 cm)
WARNING
Tip Over Hazard
Refrigerator is top heavy and tips easily when not
completely installed.
Keep doors taped closed until refrigerator is
completely installed.
Use two or more people to move and install
refrigerator.
Failure to do so can result in death or serious injury.
A B
A
B