Jenn-Air FREESTANDING OUTDOOR GRILLS, Инструкция по установке и руководство по эксплуатации и уходу

Страница: 14 / 96

14
5. Use 24 mm wrench to remove the orifice nut.
6. Take out the orifice support, and then use a 6 mm socket and
wrench or 6 mm nut driver to remove the LP orifice at the end
of the supply pipe. Replace with Natural gas orifice.
IMPORTANT: Check that the orifice is properly installed
inside of the supply pipe.
7. Reinstall the spider guard, access cover, and wind baffle.
Change the Sear Burner Orifices
1. Remove the screw securing the igniter and the 2 searing side
burner screws.
2. Lift out the searing side burner.
3. Locate the Liquid propane orifice at the end of the valve.
4. Use 6 mm socket wrench or 6 mm nut driver to remove the
orifice. Replace with the Natural gas orifice.
IMPORTANT: Check that the orifice is properly installed
inside of the valve.
5. Reinstall the searing side burner. Make sure that the igniter is
out of the way to allow proper positioning of burner. Use
Phillips screwdriver to attach the mounting screws.
A. Orifice nut
A. Orifice support
B. Orifice
A
A
B
A. Orifice
A. Orifice
A
A