9. Completed Assembly as shown in Fig. 8.
Non-Jenn-Air grills
：
Fig. A1
A: For Horizontal Firebox Mount Holes:
1. Align the holes in the support bracket (J) to the pre-drilled holes on
the right side of the grill. Attach the support bracket using two
3/16-in. screws with flat washers/lock washers/nuts (K) as shown
in Fig. A1.
Fig. B1
2. Follow Jenn-Air Grills assembly instructions from step 1 to step 8 to
finish assembly.
Note:
You need to place shaft collar (F) into the slot on the support
bracket (J) .
B: For Vertical Firebox Mount Holes:
1 Align the holes in the motor bracket (B) to the pre-drilled holes on the left side of the grill. Attach
the motor bracket using two 2-3/4 -in. screws with flat washer/lock washers/nuts (C) provided as
shown in Fig. B1.
2 Following JennAir Grill assembly instructions from step 2 to step 8 to finish assembly.
OPERATING INSTRUCTIONS
ROTISSERIE OPERATING INSTRUCTIONS
IMPORTANT: Your grill may be equipped with rotisserie burners. The instructions below
include operation for grill equipped with rotisserie burners and instructions for grill not
equipped with rotisserie burners. Be sure to follow the instructions appropriate for your grill.
Use of the rotisserie (also see grill instruction manual)
After installing the spit rod, slide one of the meat forks onto the rod (prongs toward the meat.) Center
the product to be cooked on the rod, then push the meat forks firmly together. Tighten the wing nuts.
It may also be necessary to wrap the food with butcher’s string to secure loose portions. Never use
nylon or plastic string.
Once the food is secure, insert the pointed end of the rotisserie rod into the motor assembly and rest
the shaft collar at the other end in the slot on the right-hand side of the grill. Turn the power switch to
the “ON” position to start the rotisserie motor.
Remove rotisserie when not in use.
ROTISSERIE USE WITH ROTISSERIE BURNER
When the rotisserie is mounted and in operation, only the rotisserie burner should be used for cooking.
The main burners on the grill should be in the “OFF” position when the rotisserie burner is in use.
IMPORTANT:
To keep the rotisserie handle from becoming hot, do not use the side burner when the rotisserie is
in use.
1. Check for clearances with the cooking grids before lighting the grill as the cooking grids will
become hot. If the meat touches the cooking grids during any part of rotation, the cooking grids
8
