www.weedrazers.com
3
Notes:
Assembly & Instructions
The Weed Razer Pro comes fully assembled.
Simply snap the handles together with the
handle connectors.
Step 1
Press the spring-loaded buttons on one end of the
handle connector, slide it into the open end of the
handle, and turn it until the buttons snap into the
holes in the handle.
Step 2
Open the cutting blades wider to one of the four
blade positions based on the density of the aquatic
vegetation. A narrow blade position will work best
for dense vegetation. With the blade covers still
on, press the spring-loaded buttons on both sides
of the center strut and slide toward the handle. You
may need to carefully pull outward on a blade arm
to assist. Make sure the spring-loaded buttons
snap into the locked position before use.
Step 1
Throw the Weed Razer out and over area to be
cleared. If you are on a dock, tie the rope to a post
so you don’t throw too far.
Step 2
Let the Weed Razer sink.
Step 3
Pull back in using short, hard, jerking motions.
Repeat as many times as needed to clear your
weeds.
Operating Instructions
