1. Press the plug button (D) on the cube.
D
Settings
if you want to complete this pack with other Jenile transmitters (see products on
page 16), then make adjustments to connect your devices between each other.
To connect all your products, please follow the instructions carefully.
2. Release it as soon as the cube lights up in
red (WARNING : do not hold down the button
after the color lights up, you are at risk of
deleting all previous connections)
3. Immediately actuate one transmitter while
the red light is on (ring the bell, press on the
remote control, shout on the baby crying
detector, …) Or refer to the instruction manual
of your transmitter.
8
