1. Activate the vibrator by pushing
down the ON button.
Settings
if you want to complete this pack with other Jenile transmitters (see products on
page 16), then make adjustments to connect your devices between each other.
To connect all your products, please follow the instructions carefully.
2. Press the plug button (C) until the vibrator
turns red (WARNING : do not hold down the
button too long, you are at risk of deleting all
previous connections)
3. Immediately actuate the transmitter after
having pressed the plug (ring the bell, press
on the remote control, shout in the baby crying
detector, …)
14
