JENCO VisionPlus pH618N Скачать руководство пользователя страница 12

not been the result of abuse or misuse, within the warranty period, 
please return-freight-prepaid and the correction of the defect will be 
made free of charge. If you purchased the item from our Jenco 
distributors and it is under warranty, please contact them to notify 
us of the situation. Jenco Service Department alone will determine 
if the product problem is due to deviations or customer misuse. 

 

Out-of-warranty products will be repaired on a charge basis. 

RETURN OF ITEMS 

Authorization must be obtained from one of our representatives 
before returning items for any reason. When applying for 
authorization, have the model and serial number handy, including 
data regarding the reason for return. For your protection, items must 
be carefully packed to prevent damage 
in shipment and insured against possible damage or loss. Jenco 
will not be responsible for damage resulting from careless or 
insufficient packing. A fee will be charged on all authorized 
returns. 

 

NOTE: 

Jenco reserves the right to make improvements in design, 

construction and appearance of our products without notice. 

 

(Version:05202009) 

 

 

 

JENCO INSTRUMENTS, INC.

 

7968 Arjons Drive, Suite C 
San Diego, CA 92126 USA 
TEL: 858-578-2828 
FAX: 858-578-2886 
E-Mail: [email protected]; [email protected] 
Website: www.jencoi.com

 

 

JENCO ELECTRONICS, LTD.

 

P.O. BOX 117 Jhong Jheng RD, Linkou Shiang, 
Taipei, Taiwan 
TEL: (886-2)2601-6191 
FAX: (886-2)2601-7206 
E-Mail:[email protected] 

 

SHANGHAI JENCO INSTRUMENTS, LTD.

 

18 Wang Dong Zhong RD,Sijing Town, Songjiang 
Shanghai, China

 

TEL: 86-21-5761-9599 
FAX: 86-21-5761-9598 
E-Mail:[email protected] 
Website:www.jenco.com.cn 

 
 

 

11 

 

Содержание VisionPlus pH618N














Отзывы: