manualshive.com logo in svg

JENCO 6360, Руководство по эксплуатации

Поделиться
Скачать
JENCO 6360 Скачать руководство пользователя страница 3

1 

GENERAL INTRODUCTION 

Thank you for selecting the 6360 meter. The 6360 is a precision tool 
that measure pH, ORP, conductivity, TDS, salinity and temperature. 
A built-in microprocessor stores, calculates and compensates for all 
parameters related to conductivity and temperature determinations. 

This unit has a waterproof IP65 case. The touch mode keys are 
highly reliable with tactile and audio feedback. This meter can 
operate with six AAA-size alkaline batteries or a UL/CE approved 
AC adapter. Re-calibration is not required when power is restored. 

The front of the meter has a large LCD that displays temperature 
and either temperature compensated or non-temperature 
compensated conductivity, pH, ORP, temperature compensated 
TDS or salinity simultaneously along with user prompts and mode 
indicators. The unit prompts the user through calibration and 
measurement procedures. 

The unit is also equipped with a non-volatile memory allowing the 
user to store 50 different sets of readings. This unit will assign a site 
number for each set of reading so the user can review the data 
easily. 

The model 6360 is available with a four-wire conductivity cell 
(K=0.475) and a two-wire conductivity cell (K=0.1). Other features 
include automatic conductivity ranging, automatic temperature 
compensation, long battery life and 50/60 Hz AC noise rejection. 
This unit is universal and user-friendly for field, industrial and 
laboratory applications. 

①

LCD

②

RS232 

connector

③

Keypad

Содержание 6360























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды