Jema Autolifte JA3000S, Инструкция по установке, эксплуатации и обслуживанию

Страница: 10 / 28

WE ARE HERE TO SURPRISE
10
Step3: Connect the limit switch wires to the wiring terminals in the control box. Make sure to connect NO.1 wire with
NO.1 terminal , NO.2 wire with NO.2 terminal and so forth.
Step4: Link the air hose to compressed air source. (This step is only for the type with pneumatic safety lock)
Step5: Adjustment of lowering speed
Before the lift is used, the user must be sure to adjust the lowering speed properly according to user's request.
It is important to bear in mind that the lift has a maximum capacity of 3000 kg. Which means the lift is not lower
too fast with max capacity.
Lowering speed is adjusted on the screw on the right hand side of the engine. The adjustment is done as follow,
the user rise the lift, and then starts to lower the lift when the screw is screwed in the lower speed will decrease and if the user
screw the screw out the lowering speed will increase NB. Remember to adjust before load of car and it is important to
remember the lift will lower much faster when there is load on the lift.
A explanation video how to adjust lowering speed and pump pressure can be found here:
jemaautolifte.dk/adjustment_of_220V_engine.wmv
Step 6: Fix the base frame. (Optional )
8mm connection direct to compressor
6mm connection for the lift