background image

                                                                                                                         

               

Installation, operation and parts manual

 

 

                                                                                                                 

JA2000J 

 
 

 

 

12 

MAINTENANCE   

By  complying  with  the  statutory  servicing  can  be  sure  your  Jema  Autolifte  jack  will  operate  safely  and  with  minimal  maintenance.  Jema 

Autolifte jack should be made mandatory servicing 1 annually - You can contact your Jema Autolifte distributor service department.

 

´ 

Positions need to be greased.   

 

6.1 Daily checking items before operation   

The user must perform daily check. Daily check of safety lock system is very important – the discovery of device failure before action could 

save your time and prevent you from great loss, injury or casualty. 

. Judge whether the safety latches are engaged by sound. 

. Check whether oil hose well connected and whether it leaks or not. 

6.2 Weekly checking items   

·Check the flexibility of moving parts. 

·Check the working conditions of safety parts. 

.

6.3 Monthly checking items 

 

. Check the tightness of hydraulic system, screw tight the connectors.   

. Check the abrasion of moving parts.   

If the above maintenance requirements are strictly followed, the jack will keep in a good working condition and meanwhile  accidents 

could be avoided to a large extent.

 

 

 

 

 

S/N 

Name   

UP rotor shaft   

Rotor wheel   

Roll wheel   

Содержание JA2000J




















Отзывы: