JEM ZR12-AL, Руководство по обслуживанию

Страница: 13 / 29

13
How To Change A Pump:
1. DRAIN ALL FLUID FROM THE SYSTEM FIRST.
2. DISCONNECT FROM MAINS SUPPLY.
3. Remove TOP COVER .
4. Disconnect the POWER wires from the PUMP .
5. Disconnect the BLACK RUBBER FLUID LINE from the rear of the PUMP .
6. Move the fluid line out of the way. ( BE CAREFUL OF FLUID COMING BACK DOWN THE
PIPE )
7. Disconnect the COPPER FLUID LINE from the front of the pump.
8. Unhook the rear RUBBER MOUNT from the pump.
9. Withdraw the pump from the front RUBBER MOUNT.
10. Remove the PUMP from the machine.
11. Remove the BRASS FITTING from the front of the PUMP.
REFITTING:
12. Fit the BRASS FITTING to the front of the pump using a THREAD SEALANT COMPOUND.
13. Fit the new PUMP to the CHASSIS by inserting the front end first into the RUBBER MOUNT.
14. Hook the rear mount onto the back of the pump.
15. Reconnect the
BLACK RUBBER PIPE .
16. Reconnect the POWER wires to the PUMP – BROWN INSIDE / BLUE OUTSIDE.
17. Turn machine on and RE-PRIME the system.
18. Refit TOP COVER .