JEM Radio II
Operation Guide
NXDN
INFO
Error Messages
DIGIAL
DESCRIPTON
1 DEFLT RAN
RAN codes should be entered for each home
channel in the C05053 program on digital
channels. If no values are entered, it will by
default write RAN codes of 00 00 and a
parameter error will be displayed as a warning
when the data is written to the device.
INFO
DESCRIPTON
“Serial Number”
DECK VER
JEM supplied firmware for the deck of the
radio
HEAD 1 VER
JEM supplied firmware for the head of the
radio
HEAD 2 VER
JEM supplied firmware for the 2nd head of
the radio if there is one.
MODEL
Model of internal radio
RADIO FIRM
ICOM/KWND supplied firmware
Message
Cause
“NON-HOME ONLY”
RAN button is hit when on a home channel
“PTT is ON”
When the radio powers up and any of the PTT inputs are
low (active), the radio will print out the message “PTT is
ON” to alert the user that there may be a stuck PTT source.
The radio will not go into transmit mode until all of the PTT
inputs are first inactive.
11
