Jeio tech Lab companion SI-300, Инструкция по эксплуатации

Страница: 27 / 69

Page 26
⑤ The Prg2.will appear on the
display.
Use Up button and Dwon button to
select the desired segment.
Press Enter button to finish the
set.From selection of ③ ~ ⑤,
9step prgram will be set.
In Prg2, Time 2 and Temp 2 be
set and In Prg3, Time 3 and Temp
3 be set. This program function
can be set till Prg 9.
⑥ If input the time 00:00 in
Prg3, the program is finished
The program will be operated
until Prg2 and step 2.
Example of Prgrammed Control Input in Timer Button
① The maximum step is 9.
If input the time 00:00, the step has been input until step 7.
② If the Loop is 10 and Seg.L is 3, The step operates total
52cycles.
Total Step:(Step.1 ~ Step.7) → 1 Cycl e
: (Step.3 ~ Step.7) → 9 Cycle
Total : 52 Step