PB10 (PBE)
This document is protected by copyrights.
Copying, using, or distributing without permission of JEI Group Ltd is prohibited.
24
4.4.5. Adjusting the slider clearance
Use
the
13
mm
combination
wrench
to
loosen
the lock nuts (
1
, Fig. 11). Then, use the
5
mm
hex
wrench
to
loosen
eight
screws
2
.
To
access
the
screws, change the slider
position by rotating the draw nut
3
with the 13 mm combination wrench. Next, move
the slider to the most outward position and tighten the adjusting screw (
4
) to gently
press the guide to the slider. Moving the slider to the most inward position, tighten
the screws (
2
) lightly to 1.5
–2.5 Nm (13–22 in-lbs) and the screws (
4
) placed at the
current position of the slider. Move the slider through the whole length and if it moves
smoothly and uniformly, maximally tighten the nuts (
1
).
Fig. 11.
Adjusting the slider clearance
4
1
3
Slider
Guide
2
