Minibeast Cordless
This document is protected by copyrights.
Copying, using, or distributing without permission of JEI Drilling & Cutting Solutions is prohibited.
13
Do not charge fully charged battery.
Before charging the battery, read the charger manual.
4.6. Installing and removing the battery
Slide the battery in (1) until it locks into place. Press and hold the battery lock (2) to
remove the battery (3).
4.7. Clamping surface requirements
The ferromagnetic surface to which the drilling machine is clamped must be at least 6
mm (0.24”) thick.
4 LEDs light up green
≤ 100%
3 LEDs light up green
≤ 75%
2 LEDs light up green
≤ 50%
1 LED lights up green
≤ 25%
1 LED flashes green
charging required
1
2
3
Charge status button
Charge indicator
