1.1. unroll window completely
1.2. unscrew the 3 screw on the chromium grill
(1)
and remove the chromium grill
1.3. unscrew screw on the locking rosette
(2)
and move the rosette downward and remove it
1.4. push the grill of rear mirror triangle
(3)
upward away
1.5. carefully move the small
wooden grill (5)
upward out
(caution: it could break!).
1.6. push the handle for the inner lock
(4)
and remove it
1.7. open the cover of the door tray and remove it
( see fig./arrows )
1.8. pull out the entry lamp and unplug connections
1.9. unscrew the inner lock grill
(5)
and remove it
1.10. carefully move the
large wooden grill (7)
against the door lock and remove it from the
door lining
(caution! It could break!)
1.11. disconnect coupling for seat adjustment and remove the wooden grill
(7)
1.12. unscrew screw on the inner lock
(5)
1.13. unscrew screws of the door tray (front and rear)
1.14. carefully remove the plastic clips of the door lining and move it vertically away from
the door metal
1.15. disconnect the original speaker cable and dismantle the original speaker unit
(will not be used). The grills need not to be removed
SL up to models ’96 (original round speaker grill)
1 . Disassembly of the door lining 75075 - models up to
75075/76075 - SL Cabrio
- 3 -
© JEHNERT SOUND DESIGN
75075/76075 - SL Cabrio
- 12 -
© JEHNERT SOUND DESIGN
as the SL shows special acoustic characteristics we recommend the following
sound adjustment to optimize the stereoscopic sound:
our recommendation:
adjust the balance two points further to
the right side (from driver’s side) – may vary
according to the different types of radios.
9. recommended sound adjustment on the radio
�
