6.1. sockets for plastic dowels – mount onto the door build:
insert the sockets (hardware bag) to the panel recess:
6.1.1. set a hot melt adhesive point into the recess.
Hot melt adhesive hardens very fast. Do not set all
adhesive points simultaneously.
6.1.2. slightly hammer the socket up to 2mm
under the panel surface.
fig. socket for plastic dowel
fig. mounting points for the sockets
6.2. plastic dowels – mount onto the speaker grill:
hammer the thread of the plastic dowels (hardware bag) into the
6mm drill holes (already prepared in the grill):
6.2.1. set a hot melt adhesive point into the recess.
Hot melt adhesive hardens very fast. Do not set all
adhesive points simultaneously.
6.2.2. hammer the plastic dowels with a 10mm
socket wrench
5. Installation of loudspeaker cables
Loudspeaker cable into the doors:
5.1. carefully remove the moisture protection foil
5.2. install cables:
Lead 1 speaker cable (1,5 - 4mm
2
) from amplifier into the door.
(mount of crossover circuit: in the hollow space above
the front subwoofer - see page 10
5.3. reinstall the moisture protection foil
75059 - Audi A 6 - models from 6’97
- 7 -
© JEHNERT SOUND DESIGN
75059 - Audi A 6 - models from 6’97
- 8 -
© JEHNERT SOUND DESIGN
�
�
6. prepare for installation of speaker grill
plastic dowel
