JEHNERT Sound Design | Im Michelreis 14 | D-72124 Pliezhausen | Tel. 07127 / 93457-0 | Fax 07127 / 93457-10 | [email protected] | www.jehnert.de
Assembly instruction
Status: 02.11.2023
VW Bus T6
cab system 65400-2
Art. N0. 65400
5
4. Dämmung der Fahrzeugtüren und Türverkleidungen
5. mounting the door panels on the vehicle doors.
Important recommendation:
The use of woofers in the door panel causes vibrations due to the oscillations of the bass,
which can lead to rattling noises in the vehicle door:
Measures against vibration noise:
4.1. insulation of the vehicle doors
- Cover the back of the door trim with insulating fl eece (Order No. 27000) or foam material.
or
- Stabilize rear side of door trim with stiff ening compound (GRP fi ber fi ller or similar).
IMPORTANT: Make sure to leave the cut-outs for the door airbag and speakers free!
- Cover the *backside of the door panel inside (=outer door skin) with self-adhesive
bitumen mats / tar mats (see example below).
- by tapping the vehicle door, vibration noises of door mechanism parts (e.g. Bowden cables etc.)
and localize cable harnesses and wrap them with foam / felt, foam rubber or similar.
- cut off protruding cable ties (rattling noises!)
- glue felt or foam under the original wiring harness
4.2. insulation of the rear side of the door panel
- Apply insulation fl eece (Order No. 27000) to the back of the door trim.
or foam
or
- Stabilize the rear side of the door trim with stiff ening compound (GRP fi ber fi ller or similar).
IMPORTANT: Make sure to leave the cut-outs for the door airbag and speakers free!
5.1 Hook the door panel into the top of the door shaft strip.
5.2 Reattach the door trim in reverse order.
Ensure that the clips are unlocked, see Fig.
1. first insulation layer with alubutyl mats
2. second insulation layer with insulation fleece mats
Final check after door panel assembly:
Check all functions of controls such as seat adjustment, glove box opening, window regulator, etc.
ATTENTION / Danger !!!
No insulating material behind side airbags
IMPORTANT:
No insulating material behind speakers and door releases. Leave out
fastening clips
!
