Jegs 86008, Руководство пользователя

Страница: 12 / 25

Assembly Cont.
11
Connecting the Generator
to an Electrical System
If you are connecting the generator to a building’s
electrical system for standby power, you must use
a qualified electrician to install a transfer switch. The
power from the generator must be isolated from
the circuit breaker or alternative power source. The
connection must comply with all electrical codes
and applicable laws.
This generator produces a very high
voltage which could result in burn or
electrocution causing serious injury or death.
• Never handle the generator, electronic devices, or
any cord while standing in water, while barefoot,
or when hands or feet are wet.
• Always keep the generator dry. Never operate
Do not overfill the fuel tank. Provide
space for fuel expansion
generator in rain or under wet conditions.
• Use a ground fault circuit interrupter (GFCI) in a
damp or highly conductive area, such as metal
decking or steel work.
• Never plug electronic devices into generator
having frayed, worn, or bare wires. Never touch
bare wires or make contact with receptacles.
• Never permit a child or unqualified person to
operate the generator. Keep children a minimum
of 10 feet away from the generator at all times.
• If using the generator for back up power, notify
the utility company.
• Install a transfer switch. Failure to isolate the
generator from the power utility could result in
serious injury or death to electric utility workers.
Never directly connect the generator
to a household power source.