Jegs 555-44400, Инструкция по сборке

Страница: 2 / 28

Precautions
Precautions With Small Children
• For children under the age of 13, parential guidance
is recommended when running.
Assembly Precautions
• Choking hazard. Do not assemble near small children.
• Check the contents carefully before assembly. Please
contact Customer Service at: 1.800.345.4545 if you
have any defective or missing items.
• Carefully read through this manual, and familiarize
yourself with the instructions.
• Many different tools are required during assembly.
For safety purposes, please use the correct tools.
• Exercise caution when using sharp tools such as a
hobby knife.
• Many different materials are used in the construction of
these parts. Use extra care when handling parts with
sharp edges, such as machined metal components.
• When cutting plastic parts, watch for any flying parts.
• Try to assemble any rotating parts or drivetrain parts
as carefully as possible.
• Bundle wires neatly away from the ground or any moving
drivetrain components. Make sure that all wires are
securely connected to prevent electrical shorting.
Precautions Before Running
• Some models may exceed speeds of 25 mph. Practice
common sense and run the car in open safe places, or
R/C car tracks.
• Do not run the car on public roads with high
amounts of traffic, or in areas that may cause an
inconvenience to people in that area.
• R/C cars are controlled using a radio frequency. In a
worst-case scenario radio interferences may cause
loss of control.
• If others near you are running R/C cars, confirm that
they are not running on the same frequency.
• This unit is manufactued with waterproof electronics,
but it should not be submerged in water for extended
periods of time.
• The drivetrain of an R/C car consists of many moving
parts like gears, shafts, and tires. Avoid touching these
areas when the battery is connected.
• Many parts of an R/C car will become hot after
running. Allow the parts to sufficiently cool before
conducting any maintenance.
Beginning a Run
1. Place the R/C car so that the wheels are off the ground.
2. Confirm that the speed controller switch is OFF, and
connect the motor and battery.
3. Switch the transmitter ON. (Do not use the transmitter
with low voltage. Ensure that the transmitter batteries
are good before use)
4. Turn the speed controller switch ON.
Ending a Run
1. Turn the speed controller switch OFF.
2. Disconnect the battery.
3. Turn the transmitter switch OFF.
Battery Usage
(Carefully read the instruction included with the batteries.)
• When charging batteries, ensure nothing flammible
is in the surrounding area. Also avoid charging in
high-temperature locations.
• When charging batteries, be sure to frequently monitor
the battery. Unattended, it could pose a fire hazard.
• If the battery reaches 122º F or more, stop charging.
• Batteries will become hot after running. Continuous
use of the battery pack may result in damage to
the cells. Allow the battery too cool down before
re-charging. Using a battery conditioner after running
may prolong the life and performance of the battery.
• Please do not discard old battery packs in the trash.
Locate a battery disposal center.
Motor Usage
(Carefully read the instruction included with the motor.)
• Connecting a 7.2V battery directly to the motor can be
very dangerous.
• Choose the appropriate gear ratio that matches the
motors power characteristics.
• Using a gear ratio not suited to the characteristics of the
motor will not only prevent the motor from performing
at its optimum, but may damage the other electronics.
• Motors will generally become very hot after running.
Continuous running will reduce the life of the motor.
Allow the motor to sufficiently cool between each run.
1