8
USER MANUAL
v1.1
JEFUNIPCPGR
UNIVERSAL POWER COUPLING GREASE GUN
www.jeffersontools.com
OPERATION
Ensure that you have read and fully understand all of the safety requirements for the grease gun and the power tool
you are using.
1.
Set the Power Tool to forward drive
2.
Push any trapped air iby gently pushing the Plunger into the Container Housing
3.
Secure the Nylon Hose Output to the fitting which requires the lubrication
4.
Press the trigger on the power tool to activate, the grease will begin to lubricate from the hose output
5.
To stop, turn off the power tool and disassemble
Warning:
Keep hands away from moving parts and grease outlet during operation. Ensure that any electrical power
tools are used within the motor capacity, do not allow motor to overheat. For air powered tools do not exceed the
rated working pressure.
MAINTENANCE
Warning:
Risk of electric shock. Always disconnect any equipment from the mains supply before carrying out any
cleaning or maintenance.
•
Maintenance and repair must be performed by a qualified person. Do not carry out any maintenance work before
carefully reading the following instructions. Faulty parts should be replaced only with approved components
having the same specifications as the original ones.
•
Ensure the hose, connections and container housing are kept clean and free from debris before use.
•
Oil any moving parts as required.
TROUBLESHOOTING
Symptom
Possible Causes
Solution
Power tool running but no
lubrication from the grease gun.
1.
Possible air lock.
1.
Disconnect the power tool and disassemble the container
housing . Remove the plunger rod fully and then push it firmly
back into the container to release the trapped air. Repeat if
necessary until the grease begins to flow. Reassemble.
Plunger will not enter the grease
cartridge.
1.
The cartridge is not compatible.
2.
The cartridge may be warped or
damaged at the rim.
1.
Fit a compatible cartridge.
2.
Fit a cartridge that is not damaged.
Leakage from the gun head.
1.
The nylon hose is not tightened securely
at the gun outlet.
1.
Screw / tighten the hose and ensure that it is secure.
