7
USER MANUAL
v1.1
JEFUNIPCPGR
UNIVERSAL POWER COUPLING GREASE GUN
www.jeffersontools.com
GREASE LOADING
This equipment is compatible with 3 methods of grease loading:
CARTRIDGE LOADING
1.
Remove the two ends of the Container Housing (Gun Head and
Plunger Assembly).
2.
Pull the Follower Handle back until the Rod is fully extended (carefully
release the follower handle to eject / remove used cartridge, if present).
Pull back the Follower Handle until fully extended then pull it sideways
to latch the Rod groove into the keyhole slot in the container cap (
Fig.3
)
3.
Remove the caps from both ends of the Container Housing and insert
the open end of the cartridge with the metal rimmed end toward the
bottom cap / plunger end.
4.
Loosely assemble the head and the Container Housing and disengage
the follower rod from the Container Cap. Engage the Follower Rod with
the Follower by rotating the Follower Handle.
5.
Unscrew the Container Housing 1-2 turns from the Gun Head
and Plunger Assembly and exert force on the follower handle until a
little grease is released from the outlet at the Gun Head. Tighten the
Container Housing back into the Gun Head and Plunger Assembly.
6.
Disengage the Follower Rod from the Follower by rotating the
Follower Handle. Push the Follower Rod into the container. Then
assemble the Nylon Hose and screw it into the outlet at the Gun Head.
Please Note:
Ensure that the grease cartridge is not damaged in
anyway before inserting into the Container Housing. The cartridge
should fit smoothly and require little force to insert. Do not insert the
grease cartridge if it is damaged or warped from its cylindrical shape. If
the cartridge is damaged or warped in anyway the equipment will not
function correctly and the cartridge could become lodged in the housing.
Do not try to re-use empty grease cartridges.
DISPENSER LOADING
1.
Remove any used greased cartridges from the Container Housing.
2.
Remove the slotted plug from the Gun Head assembly and insert the
required loader fitting that is compatible with the pump being used.
3.
Extend the level out on the grease gun and insert the loader fitting into
the pump adapter and fill as required (Fig.4). Reassemble the housing.
BULK LOADING
1.
Remove the gun head from the Container Housing
2.
Draw back the Plunger Handle fully.
3.
Use a scoop or utensil to add the required amount of grease to the
Container Housing.
4.
Reassemble the housing.
Fig.3
Fig.4
Cartridge Loading
Dispenser Loading
Fig.5
Bulk Loading
