5
USER MANUAL v1.2
JEFPDB0550
550W
Bench Drill • 230V ~50Hz
www.jeffersontools.com
Parts Identification
1
Pully Cover
2
Motor
3
Switch
4
Chuck Guard
5
Chuck
6
Feed Handle
7
Table
8
Table Holder
9
Belt Tension Lock Knob
10
Column Support
11
Base
12
Main Housing
13
Column
14
Bolts
15
Depth Stop Lock Knob
Unpacking & Working Environment
The equipment is delivered with the components shown above. After unpacking, check the parts against this list and check for any damage aused
during transit. If any damage is found contact your Jefferson Dealer and arrange a replacement.
Do not discard the packaging until the machine is assembled. The packaging consists of cardboard and appropriately marked materials which can
be sent to a suitable re-cycling centre.
To protect the machine parts from moisture, a protective coating of light machine oil will have been applied to the outside surfaces. Remove any
excess with a paper towel.
Take care when lifting the heavy head assembly. Before use, the machine must be mounted, and securely bolted, to a strong, heavy workbench, of
sufficient height that you will be standing upright when working.
Ensure the work place is adequately lit, and that you will not be working in your own shadow.
Always ensure the bench drill is disconnected from the power supply during assembly, setup, adjustment and servicing. Never leave
the equipment running while unattended.
