JEFBGS06
150mm Bench Grinder
C. Equipment Safety:
•
Check that the
power switch is set to the "
Off
" position before connecting it to the mains power supply.
•
Always ensure that all grinding wheel lock nuts, securing bolts, clamps and guards are tightened and secure before
operation.
•
Always disconnect this equipment from the power supply before carrying out any adjustments or maintenance.
• This equipment is designed for indoor use in well-lit, dry and well ventilated environments. Do not use in damp
conditions to avoid electric shock.
•
Keep all guards in place and in good condition.
•
Replace cracked, damaged or worn grinding wheels immediately.
•
When fitting a new grinding wheel, always check that the RPM is equal or lesser than the RPM stated on the grinder.
Ensure that the new wheel is free from damage or flaws before fitting.
• During start-up, stand to one side of the grinder and switch to the "
On
" position. Let the grinder operate at full
speed for approximately one minute to allow any undetected flaws or cracks become apparent.
•
Ensure that all accessories are compatible with this model or recommended by the manufacturer.
•
Never attempt to cut anything with the grinding wheel.
•
Never overtighten spindle nuts.
•
All service and maintenance tasks on this equipment should be carried out by authorised and qualified technicians.
•
Adjust tool rests whenever necessary to maintain a distance of 1/8" (32mm) from the grinding wheel.
D. Electrical Safety:
•
Ensure that all cables & plugs are in good condition before use.
•
Ensure that the equipment is grounded before use. Grounding helps to ensure that the current will take the path of
least resistance in the event of an electrical malfunction or short circuit thereby reducing the risk of electric shock for
the operator.
•
This machine is equipped with an electrical cord that has an equipment grounding conductor and a grounding plug.
The plug must be plugged into a compliant outlet that has been properly installed and grounded in accordance with
current specifications and ordinances.
•
Never modify the plug provided. If it does not fit the outlet ensure that the correct outlet is installed by a qualified
technician.
E. Using Extension Cables
•
Ensure that all extension cables are compatible for use with the tool and that they are correctly wired and free
from wear and damage.
•
Ensure that the extension cords are heavy enough to carry the current drawn by this equipment. If the extension
cable is not heavy enough - a drop in voltage can occur - resulting in loss of power and overheating and damage to
the motor that is not covered under warranty.
JEFBGS06
150mm Bench Grinder
3. Box Contents / Machine Parts Itinerary
ITEM
QTY
Left Work Rest
1
Right Work Rest
1
Plain Eye Shield
1
Eye Shield Fixing Knob
1
Eye Shield Mounting Rod (1 left, 1 right)
2
Eye Shield Assembly Mounting Bolt M6x30
2
Eye Shield Assembly Mounting Washer D6
2
Eye Shield Assembly Mounting Locking Washer D6
2
Work Rest Fixing Knob
2
Work Rest Fixing Pain Washer D5
2
Work Rest Fixing Locking Washer D5
2
Coolant Tray
1
Spark Deflector
2
Spark Deflector Fixing Screw Assembly
2
4. Parts Identified
Fig.1 - Parts
3.
4.
