Jefferson Professional Tools & Equipment JEFGENDIEWEL180, Руководство пользователя

Страница: 5 / 20

5
www.jeffersontools.com
USER MANUAL
180A
•
5.8kVA Diesel Welder Generator
JEFGENDIEWEL180
SAFETY GUIDELINES
Please read and ensure that you understand all of the operating instructions, safety
precautions and warnings in this Instruction Manual before operating or maintaining this
equipment. An accident can often be avoided by recognizing a potentially hazardous
situation before it occurs, and by observing the appropriate safety procedures. Hazards
that must be avoided to prevent bodily injury or machine damage are identified by warnings
on the equipment and in this Instruction Manual. Never use this equipment or modify it
in any way that has not been specifically recommended by the manufacturer. Contact a
qualified electrician for advice on any issues relating to electrical safety in your working
environment.
ELECTRICAL SAFETY
Ensure that you check the equipment thoroughly to ensure it is safe and fit for purpose before each
use. It is important that you inspect all plugs, sockets, power cables and electrical fittings for wear
and damage and repair or replace any defective components. The risk of electric shock can be
minimised by the correct use of the appropriate electrical safety devices.
•
The
Electricity at Work Act 1989
includes legislation that places legal implications on employers to ensure
the safety of electrical devices in the workplace. The regulations dictate that all portable equipment must be
inspected regularly and tested to ensure that it is safe for use. 'Portable equipment' means any electrical item
that can be moved and this is often referred to as
Portable Appliance Testing (PAT)
. PAT testing should be
carried out regularly on this equipment by trained, authorised personnel, as required by the legislation.
•
The
Health and Safety at Work Act 1974
states that it is the responsibility of the owner of electrical appliances
to ensure that both the equipment and working environments are maintained to ensure safe operation at all
times.
•
Check that all equipment cables are secure, correctly insulated, free from damage, and protected against short
circuit and overload before connecting to the power supply. Do not use worn or damaged cables, plugs, sockets
or other fittings.
•
Do not use the generator in damp / wet conditions.
EQUIPMENT SAFETY
•
The exhaust gas is poisonous, never use a generator indoors or in an attached garage. Always run your
generator outdoors in a well-ventilated area. Keep the generator at least 1 meter (3 feet) away from buildings and
other equipment during operation.
•
Place generator on level ground to operate.
•
The load must be kept within rating stated on generator rating plate, overloading will damage the unit or shorten
its life.
•
Running the engine at excessive speeds is dangerous and will damage the engine.