© J e f f R ow l a n d d e s i g n g R o u p 2 0 07. a l l R i g h t s R e s e R v e d .
21
STEP 3:
Locate jumper position
J2 on the rear panel board of the
unit. Using needle-nose pliers,
move the jumper from between
pins 1 and 2 to pins 2 and 3,
DISPLAY BLANKING ON.
(See FIGURES 2 and 3)
STEP 4:
Replace the bottom
cover. Using a Using a 5/64" hex
wrench, reinstall the nine screws
that secure the bottom cover to
the chassis.
FIGURE 3:
Jumpers J1-J2; Close-up of Display Blanking settings for the CAPRI
DISPLAY BLANKING OFF
(DEFAULT)
(DISPLAY BLANKING ON)
FIGURE 2:
Location of jumpers on back of the rear panel
J1
J1
j2
j2
jUMPERS
DEFAULT POSITIONS SHOWN
1 2 3
1 2 3