USING THE AERIS DAC VOLUME CONTROL
The
AERIS DAC
is designed such that the volume control attenuates the signal up to 32
dB below the point of LED flashing. When the right LED starts flashing, the
AERIS DAC
begins digital multiplication to increase the volume up to 20 dB above full scale. This
would be for direct drive applications where the user would like to "rock out" and not be
so concerned about potential clipping of the signal in the digital domain.
FLASHING LEFT LED
Indicates unit volume is less than -32 dB.
SOLID RIGHT LED/NO LEFT LED
Indicates maximum volume level with no potential
loss of resolution.
FLASHING RIGHT LED
Indicates digital multiplication to increase the
volume up to 20 dB above full scale. Can be used
for recordings with low digital signal levels.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"#$%!),!'(!&)
