REMOTE TRANSMITTER BATTERY REPLACEMENT
The
AERIS DAC
handheld remote transmitter is powered by 2 standard alkaline AA
batteries. When the remote transmission range decreases or no longer operates, the
batteries need to be replaced.
!
Using a standard flat blade screw driver, unfasten the holding screw located in
the bottom end of the transmitter unit.
!
Remove the spring-loaded cover.
!
Remove both AA batteries.
!
Orient the remote transmitter with the keypad facing up, and with the battery
compartment towards you.
!
Insert a fresh battery into the left barrel with negative pole (flat end) first.
!
Insert a fresh battery into the right barrel with positive pole (button end) first.
!
Install the spring-loaded cover.
!
Gently refasten the holding screw. Do not over-tighten.
NOTE:
When removing the old battery, wait at least 30 minutes before installing a new
battery to alloy the new internal circuitry to discharge completely and reset.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"#$%!)+!'(!&)
