enough to allow access to the binding posts. Install the positive (usually red) loudspeaker cable
spade terminal to the positive (+) binding post and the negative (usually black) spade terminal to
the negative (–) binding post. Secure the loudspeaker connections by tightening the knob securely
with your fingers.
8.
AUX PS INPUT:
Connect with
AUX INPUT CABLE (17)
.
9.
DC POWER INPUT:
Connect with
DC POWER CABLE (15)
.
10.
DC POWER OUTPUT:
Connect with
DC POWER CABLE (16)
.
11.
AUX PS OUTPUT:
Connect with
AUX PS INPUT CABLE (11)
.
12.
AC MAINS INPUT:
Install the
AC POWER CABLE
into the
AC MAINS INPUT
connector between
the amplifier and your AC mains outlet.
13. REMOTE ON/OFF: A 1/8” (3.5 mm) mini-plug connector is provided on the rear panel of the
MODEL
925 MONOBLOCK AMPLIFIER
for remotely switching the amplifier between Operational and Standby
modes. When connected to another component with the proper circuitry, the amplifier standby
function can be turned
ON
and
OFF
remotely.
14.
INTEGRATED HANDLES:
Use to move and position amplifier and power supply.
15.
DC POWER CABLE:
Connect to
DC POWER (9)
.
16.
DC POWER CABLE:
Connect to
DC POWER OUTPUT (10)
.
17.
AUX PS INPUT CABLE:
Connect to
AUX PS INPUTS (8)
and
(9)
.
18.
DELRON ISOLATION SPHERES:
Set each sphere in one of four circular indentions in top cover
of power supply. Align isolation spheres with circular indentions in bottom cover of amplifier.
AMPLIFIER SETUP
The
POWER SUPPLY CHASSIS
is always placed first on a stable platform, rack, or shelf.
Locate and place
DELRIN ISOLATOR SUPPORT SPHERES (18)
into each of the four
respective dimples machined into the top of the
POWER SUPPLY CHASSIS
. Carefully place
the
AMPLIFIER CHASSIS
directly above the
POWER SUPPLY CHASSIS
and move sideways
slightly until the chassis firmly “locks” into place by resting upon the Delrin spheres. This
unique chassis placement ensures both perfect alignment and effective isolation
between chassis.
NOTE: DIRECT CONTACT BETWEEN THE TWO CHASSIS MAY RESULT IN DAMAGE TO THE
ANODIZED COATING. PLACING THE AMPLIFIER ON TOP OF THE POWER SUPPLY MAY REQUIRE
TWO PEOPLE TO ABSOLUTELY AVOID DAMAGE TO EITHER CHASSIS.
MODEL 825 STEREO AMPLIFIER
PAGE 12
