REAR PANEL CONNECTIONS
Figure 2:
Rear panel connections
1. INPUT: Unbalanced RCA.
2. INPUT SELECT SWITCH:
Switch between unbalanced RCA inputs and balanced XLR inputs.
3. INPUT: Balanced XLR.
4.
LINK R TO L SWITCH:
Switch to ON position to link left and right channels.
5.
GAIN SWITCH:
Switch between gain of 26 dB and 32 dB.
6.
PHASE:
Use phase adjustment switch to accommodate system phase standards. Use PIN 2+ if the
system phase is unknown. Can be used to change absolute phase as desired. Ensure that left and
right channels are matched or bass response and imaging may suffer.
WARNING: ALWAYS POWER OFF UNIT BEFORE SWITCHING PHASE.
7.
LOUDSPEAKER OUTPUTS:
Unscrew the knob that secures the speaker output connectors on
both the
SPEAKER OUTPUT A
and the
SPEAKER OUTPUT B
and pull the securing block out far
MODEL 825 STEREO AMPLIFIER
PAGE 11
