![Jeep WRANGLER 2017 Скачать руководство пользователя страница 360](http://html2.mh-extra.com/html/jeep/wrangler-2017/wrangler-2017_owners-manual_4166205360.webp)
6. Once the engine is started, remove the jumper cables in
the reverse sequence:
Disconnecting The Jumper Cables
1. Disconnect the negative
(-)
end of the jumper cable from
the remote negative
(-)
post of the discharged vehicle.
2. Disconnect the opposite end of the negative
(-)
jumper
cable from the negative
(-)
post of the booster battery.
3. Disconnect the positive
(+)
end of the jumper cable from
the positive
(+)
post of the booster battery.
4. Disconnect the opposite end of the positive
(+)
jumper
cable from the remote positive
(+)
post of the discharged
vehicle.
5. Reinstall the protective cover over the remote positive
(+)
post of the discharged vehicle.
If frequent jump-starting is required to start your vehicle
you should have the battery and charging system tested at
your authorized dealer.
CAUTION!
Accessories plugged into the vehicle power outlets
draw power from the vehicle’s battery, even when not
in use (i.e., cellular devices, etc.). Eventually, if plugged
in long enough without engine operation, the vehicle’s
battery will discharge sufficiently to degrade battery
life and/or prevent the engine from starting.
IF YOUR ENGINE OVERHEATS
In any of the following situations, you can reduce the
potential for overheating by taking the appropriate action.
•
On the highways — slow down.
•
In city traffic — while stopped, shift transmission into
NEUTRAL, but do not increase engine idle speed.
CAUTION!
Driving with a hot cooling system could damage your
vehicle. If the temperature gauge reads HOT (H), pull
over and stop the vehicle. Idle the vehicle with the air
conditioner turned off until the pointer drops back
into the normal range. If the pointer remains on HOT
(Continued)
358
IN CASE OF EMERGENCY
Содержание WRANGLER 2017
